AC Repair Near Me

36-Point AC Repair Inspection:

We live in AZ, where summertime heat is scorching. An AC is a survival tool, so when it fails, you panic and agonize. Before you pull the plug on your unit, allow the Precision Air and Plumbing team to perform a thorough 36-point inspection. We assess, measure, test, and verify every component and explain exactly what is going on with your system.

• Exiting Air Temp: The air that exits your vents must be noticeably colder than the air going in. If it is warmer, your system may be working harder than it should and wasting energy while doing it.
• Returning Air Temp: Return air is air pulled back into the system to be cooled again. We measure it to make sure temperatures remain stable and indoor air quality does not suffer.
• Refrigerant Pressures: The refrigerant is under pressure, and that pressure reveals a lot. We measure suction, standing, and discharge pressure to achieve efficient and safe cooling.
• Reversing Valve: Switching from heating to cooling (or vice versa) requires this valve to slide into the correct position. Let us see if it is moving smoothly and directing refrigerant properly.
• Superheat: How much hotter is the refrigerant gas than its boiling point at a given pressure? Our technicians can check and prevent liquid refrigerant from sneaking into places it should not.
• Sub-Cooling: The refrigerant must stay fully liquid as it exits the condenser. Aim for proper sub-cooling to support consistent cooling and better dehumidification.
• Filters: Filters have a say on energy efficiency, comfort, airflow, and even the lifespan of your HVAC components. If they are too dirty, expect your system to struggle.
• Thermostat: Your thermostat is your AC’s “brain.” Does it accurately read temperatures and communicate with the rest of the system?
• Metering Device: This device drops refrigerant pressure before the evaporator. Any clogging or failure will result in cooling woes.
• Evaporator Coil: This coil absorbs indoor heat and removes humidity. We inspect it for cleanliness, airflow, and proper refrigerant flow.
• Outdoor Coil: The outdoor coil releases the heat that your indoor air no longer wants. If it cannot, your whole system has to work harder. Let us keep it clean, unobstructed, and functional.
• Amp Draw of Outdoor Fan Motor: You do not want your outdoor fan motor to exert too much or too little effort in removing heat from the condenser coil. Measure the amp draw to understand its performance!
• Outdoor Fan Blade and Hub: Is the fan blade loose? Is the hub worn? These tiny details create big problems, so we tighten, secure, and help everything spin.
• Blower Wheel: A dirty blower wheel can sabotage airflow. Let us aim for cleanliness, balance, and performance for quick and even cooling.
• Amp Draw of Indoor Fan (Blower) Motor: This motor pulls air in and pushes conditioned air out. Is it running efficiently so air circulates evenly throughout your space? The numbers will tell you.
• Compressor: The compressor pumps refrigerant through the system. If it fails, your AC fails. Allow us to inspect its condition, performance, and signs of trouble.
• Compressor (Main Line) Contactor: This switch controls high-voltage components. Do not worry; we verify that there is no electrical pitting, overheating, or sticking.
• Start Device: Some systems utilize a hard-start kit to provide the compressor with extra power during startup. Avoid slow or stressful starts with the help of our professional team!
• Amp Draw of Compressor: Your compressor consumes a significant amount of power. If it is consuming more than it should, that is a red flag. We will ensure you do not end up with a burned-out compressor or sky-high energy bills.
• Attic Insulation: Insulation affects how hard your AC has to work. More heat entering your home means more cooling is required, so focus on the thickness and condition of your insulation.
• Refrigerant Line Insulation: Insulation keeps the refrigerant cold and prevents condensation issues. It also protects the lines from corrosion, steering clear of leaks and any other performance problems.
• Condensate Drain Lines: What happens when drain lines get clogged? Water damage, mold, and odors take over. We check the line and flow to get rid of nasty surprises.
• Drain Pans: These pans catch condensation. They should not have cracks or rust! Allow us to scan yours and detect any damage.
• Duct System: Proper duct design guarantees even airflow. When poor or leaky ducts raise energy bills and worsen indoor air quality, examine issues in size, shape, and condition.
• Air Handler, Furnace, or PAC Unit for Level and Support: Your air handler works with your heater, PAC unit, and other HVAC system components. All of them must be level and properly supported.
• Air Handler (Furnace) or Elbow for Air Leaks: Why is cold air escaping before it reaches your rooms? There might be leaks in elbows and joints. Catch and seal them before they cause more trouble!
• Control Boards: These boards coordinate temperatures, motors, safety devices, sensors, and more. Our technicians can study the connections, components, and responsiveness.
• All Applicable Run Capacitors: Capacitors push motors to start and keep running. If yours is weak, your AC will fail. It could be the culprit you are looking for.
• Fuses: Fuses safeguard your AC from electrical overloads. They should be the correct size and have no signs of wear.
• Wiring: Bad wiring causes failures and hazards. Let our technicians examine every connection and confirm your system is safe and reliable.
• House Electrical Panel: Your main electrical panel supplies power to your AC. Does it have the proper breakers and load capacity? We will pinpoint any warning signs.
• Breakers (Checkup): HVAC systems rely on more than one breaker. Let us assess them and confirm proper sizing and function. Keep overheating at bay!
• Electrical Breakers (Tightening): What causes overheating? Loose breakers. Allow our experts to tighten connections and stop electrical issues from blowing up.
• Service Disconnect: Shut off your AC whenever you need to! This switch must be functional and up to code, so installation, repair, or maintenance tasks are always safe.
• Condensate Overflow Prevention Switch: If water builds up, the condensate overflow prevention switch turns the AC off to avoid damage. Test it to ensure it triggers correctly.

Can we really do everything we say we do? Absolutely! A mix of technology and training guides us. We use state-of-the-art diagnostic tools to get data-backed insights. Since they mean nothing without people who know how to use them, we educate ourselves and practice nonstop.

Whatever the latest developments in the industry are, we learn from and apply them. That is how serious we are about serving you. Reach out to us now and experience our comprehensive HVAC evaluation!